Electrolux 40850 - Manual (Page 24)

24
The cycle indicator for the
selected dishwashing cycle
is flashing,
fault code
Å 20 is dis-
played in the multi-dis-
play.
(Problems with water
drainage)
The sink spigot connection
is blocked.
Clean the sink spigot outlet.
Water drain hose
has not been correctly posi-
tioned.
Check the position of the
hose.
Fault code Å 30 is dis-
played in the multi-dis-
play.
The anti-flood system has
been triggered.
First shut off the water tap,
then switch off the appli-
ance and contact the Cus-
tomer Care Department.
The cycle is not starting.
The mains plug is not
plugged in.
Plug in mains plug.
A fuse in the house’s wiring
system is defective.
Replace fuse.
For dishwasher models with
a delay start timer:
A start time has been se-
lected.
If the dishes are to be
washed immediately, cancel
the delay start.
Rust spots are visible in
the dishwashing compart-
ment.
The dishwashing compart-
ment is made from rust-
free stainless steel. Rust
spots in the dishwashing
compartment are due to
rust particles from external
sources (rust particles from
water pipes, pans, cutlery,
etc.). Remove such spots
with a commercially-avail-
able stainless steel clean-
ing product.
Only wash cutlery, dishes
and pans that are suitable
for dishwasher use.
A whistling noise can be
heard when washing dish-
es.
The whistling is not a cause
for concern. Use a different brand of de-
tergent.
Malfunction Possible cause Remedy