Philips Momentum 31.5" 4K HDR 144 Hz Gaming Monitor User Manual

Page 13

2. Setting up the Display

Note

1. MPRT: To reduce motion blur, LED

backlight will strobe synchronously
with screen refresh, which may
cause noticeable brightness change.

• 75Hz refresh rate or higher is

required for MPRT.

• AMD FreeSync Premium and MPRT

cannot be enabled simultaneously.

• MPRT is to adjust brightness for

blur reduction, so cannot adjust
brightness while MPRT is turned on.

• MPRT is gaming-optimized mode.

Turn on MPRT may cause noticeable
screen flickering. It is recommended
to turn off when you are not using
the gaming function.

2. Xbox: Level up your gaming

experience while playing Xbox
games, you can even control the
connected Xbox console using the
remote control.

3. This Philips monitor is certified

with AMD FreeSync™ only. The
technology is used to match the
refresh rate of the monitor to
the graphic cards. Providing the
smoothest gaming experience by
reducing or eliminating judder,
tearing, and stuttering.

Enabling Adaptive-Sync from
the On-Screen Display menu
will automatically activate the
appropriate technology depending
on the graphics card installed in
your computer:

• If using an AMD Radeon graphics

card, FreeSync will be enabled.

• Go to www.philips.com/support

to download the latest version of
leaflet to get more information on
FreeSync certification.

Resolution notification

This display is designed for optimal
performance at its native resolution,
3840 X 2160 . When the display is
powered on at a different resolution, an
alert is displayed on screen: Use
3840 X 2160 for best results.

Display of the native resolution alert
can be switched off from Setup in the
OSD (On Screen Display) menu.

Physical Function

Tilt

-5

Swivel

+20

-20