Philips 8000 41.5" 4K HDR 138 Hz Gaming Monitor (White) - Manual (Page 7)

5
2. Setting up the
monitor
2.1 Installation
1 Package contents
Quick start
42M2N8900
Register your product and get support at www.philips.com/welcome
*DP *HDMI
* USB A-B
*USB C-C/A
*USB C-C *USB C-A
Power
VESA Bracket
*Remote control
Batteries AAA R03 1.5V
Screw and screwdriver
M4 x 4
M5 x 2
*Different according to region
2 Install the base
1. To well protect this monitor and
avoid scratching or damaging of
the monitor, keep the monitor face
down in the cushion for the base
installation
2. Hold the stand with both hands.
(1) Gently attach the stand to the
VESA mount area until the latch
locks the stand.
(2) Use a screwdriver to tighten the
assembly screws, and secure the
stand to the monitor tightly.
(3) Gently attach the base to the
stand.
(4) Use your fingers to tighten the
screw located at the bottom of
the base, and secure the base to
the stand tightly.
4
1
3
2
3. After attaching the base, erect
the monitor with both hands
holding the monitor together with
styrofoam firmly. Now you can pull
out the styrofoam. When you pull
out the styrofoam, do not squeeze
the panel .
1 2