Philips 8000 41.5" 4K HDR 138 Hz Gaming Monitor (White) - Manual (Page 14)

12
Note
VESA-Compliant mounting interface.
VESA Mounting Screw M4. Always
contact the manufacturer for wall-
mount installation.
-5°
0° 90°
* Display design may differ from those
illustrated in this manual.
Warning
• To avoid potential screen damage,
such as panel peeling, ensure that
the monitor does not tilt downward
by more than -5 degrees.
• Do not press the screen while
adjusting the angle of the monitor.
Grasp only the bezel.
2.4 MultiClient Integrated KVM
1 What is it?
With MultiClient Integrated KVM switch,
you can control two separate PCs with
one monitor-keyboard-mouse set up.
2 How to enable MultiClient Integrated
KVM
With the built-in MultiClient Integrated
KVM, Philips monitor allows to quickly
switch your peripherals back and forth
between in two devices through the OSD
menu setting.
Use USB-C and HDMI or DP as input,
then use USB-C/USB-B as USB upstream.
Please follow the steps for the settings.
1. Connect the USB upstream cable
from your dual devices to the “USB
C” and “USB UP” port of this monitor
at the same time.
Source USB Upstream
HDMI/DP USB UP
USB C USB C
2. Connect peripherals to the USB
downstream port of this monitor.
PC1 PC2
HDMI 1 HDMI 2
USB UP
USBC
USB USB
PC1/PC2
1
1
2