Philips 7000 Series 27" 4K HDR Monitor - Manual (Page 8)

6
3 Connecting to your PC
Fast Charger
USB-A DP OUT DP IN USBC1 USBC2
(DATA)
USBC3
(PD15W)
1
2 9
3 11
4 6
5
7
8 10
12
USB C-C
a-1
a-2
a-1
a-2
a b
USB Type-C
OR
a b OR
USB Type-A
USB hub (USB A-C)
OR
OR
OR
1 AC/DC power input
2 HDMI input
3 DisplayPort input
4 DisplayPort output
5 USBC1(PD 96W)
6 USBC2 upstream (DATA)
7 USBC3 downstream (15W)
8 USB downstream/USB fast charger
9 USB downstream
10 USB downstream
11 USB downstream
12 Audio Out
Connect to PC
1. Connect the power cord to the back
of the display firmly.
2. Turn off your computer and unplug
its power cable.
3. Connect the monitor signal cable to
the video connector on the back of
your computer.
4. Plug the power cord of your
computer and your monitor into a
nearby outlet.
5. Turn on your computer and monitor.
If the monitor displays an image,
installation is complete.
4 USB hub
To comply with International energy
standards, the USB hub/ports of this
monitor are disabled during Standby
and Off modes.
Connected USB devices will not work in
this state.
To permanently put the USB function
in “ON” state, please go to OSD Menu,
then select “USB standby mode”, and
switch it to “ON” state. Somehow if your
monitor reset to factory setting, ensure
to select “USB standby mode” to “ON”
state in OSD menu.
5 USB charging
This monitor has USB ports capable
of standard power output including
some with USB Charging function
(identifiable with power icon ). You
can use these ports to charge your
Smart phone or power your external
HDD, for example. The monitor must be