Philips 7000 Series 27" 4K HDR Monitor - Manual (Page 11)

9
3 Resolution notification
This monitor is designed for optimal
performance at its native resolution,
3840 x 2160. When the monitor is
powered on at a different resolution,
an alert is displayed on screen: Use 3840
x 2160 for best results. Display of the
native resolution alert can be switched
off from Setup in the OSD (On Screen
Display) menu.
4 Firmware
The over-the-air (OTA) firmware update
is through the SmartControl software
and is easily downloadable through the
Philips website. What does SmartControl
do? It is an additional software that
helps control the photo, audio, and the
other on-screen graphic settings of the
monitor.
In the “Setup” section, you can check
which firmware version you currently
have and if you need to upgrade or not.
In addition, it is important to note that
the firmware upgrades must be done
through the SmartControl software.
It is necessary to be connected to a
network when updating the firmware
on SmartControl over-the-air (OTA).
5 Physical Function
Tilt
20°
-5°
Swivel
-45°
+45°
Height adjustment
130mm
Pivot
90° -90°
0° 0°
Warning
• To avoid potential screen damage,
such as panel peeling, ensure that
the monitor does not tilt downward
by more than -5 degrees.
• Do not press the screen while
adjusting the angle of the monitor.
Grasp only the bezel.