Quick settings, Input – LG UltraWide 49WQ95C-W 49" Dual QHD HDR 144 Hz Curved Monitor User Manual
Page 16
16
ENGLISH
[Quick Settings]
[Settings]
[Quick Settings]
•
[Brightness]: Adjusts the brightness of the screen.
•
[Auto Brightness]: Optimizes the brightness automatically for surrounding illuminance.
•
[Contrast]: Adjusts the contrast of the screen.
•
[Volume]: Adjusts the volume level.
-
You can adjust [Mute] / [Unmute] by moving the joystick button to in the [Volume] menu.
•
[Color Temp]: Set your own color temperature.
-
[Custom]: The user can customize the red, green and blue color.
-
[Warm]: Sets the screen color to a reddish tone.
-
[Medium]: Sets the screen color to between a red and blue tone.
-
[Cool]: Sets the screen color to a bluish tone.
-
[Manual]: The user can fine-tune the colour temperature.
•
[PBP / PIP]: You can select the various PBP or PIP combination.
•
[USB Selection]: Select the USB upstream cable connection port to use USB hub of the monitor.
[Input]
[Settings]
[Input]
•
[Input List]: Selects the input mode.
•
[Aspect Ratio]: Adjusts the aspect ratio of the screen. The display may look the same for [Full Wide], [Original]
and [Just scan] options at the recommended resolution.
-
[Full Wide]: Displays the video in widescreen, regardless of the video signal input.
-
[Original]: Displays video according to the aspect ratio of the video signal input.
-
[Just Scan]: The aspect ratio is not adjusted from the original.
-
[Cinema 1]: Enlarges the screen with an aspect ratio of 32:9.
-
[Cinema 2]: Enlarges the screen with an aspect ratio of 32:9, including the black box at the bottom for
subtitles.
•
[PBP / PIP]: You can select the various PBP or PIP combination.
[PbP / PIP]
•
[Input List]: Displays the screens of main input and sub input
PBP / PIP Connection
Sub Screen
HDMI 1
HDMI 2
DP
USB-C
Main Screen
HDMI 1
-
O
O
O
HDMI 2
O
-
O
O
DP
O
O
-
O
USB-C
O
O
O
-
•
[Aspect Ratio]: Adjusts the aspect ratio of the screen.
-
[Full Wide]: Displays the video to fit the PBP / PIP screen, regardless of the video signal input.
-
[Original]: Displays the video in the aspect ratio of the video signal input on the PBP / PIP screen.
•
[PBP / PIP]: You can select the various PBP or PIP combination.
•
[PIP Size]: Sets the size of the PIP Sub window. ([Large] / [Small])
•
[PIP Position]: Sets the position of the PIP Sub window. (Bottom Right / Bottom Left / Top Left / Top Right)
•
[Main/Sub Screen Change]: Toggles between the main screen and sub screen in [PBP / PIP] mode.
•
[Main/Sub Sound Change]: Toggles between the audio of the main screen and sub screen in [PBP / PIP]
mode.
•
[KVM Switch]: Select the USB upstream cable connection port to use USB hub of the monitor.
NoTE
-
If not using the [PBP / PIP] feature, [PIP Size], [PIP Position], [Main/Sub Screen Change], [Main/Sub Sound
Change] and [KVM Switch] are deactivated.