LG 27BK67U-B 27" 16:9 4K UHD FreeSync IPS Monitor - Manual (Page 8)

8
ENGLISH
using the Kensington Lock
The Kensington security system connector is located at the back of the Monitor set.
For more information on installation and usage, refer to the Kensington lock owner’s manual or visit the website
at
http://www.kensington.com .
Connect the monitor to a table using the Kensington security system cable.
NoTE
• The Kensington security system is optional. You can obtain optional accessories from most electronics stores.
• The left or right side of the monitor head can be slightly rotated up or down (up to 3°). adjust the horizontal
level of the monitor head.
Installing the wall mount plate
This monitor meets the specifications for the wall mount plate or other compatible devices.
NoTE
• The wall mount plate is sold separately.
• For more information on installation, refer to the wall mount plate’s installation guide.
• Be careful not to apply too much force while mounting the wall mount plate as it may cause damage to the
screen.
• remove the stand before installing the monitor on a wall mount by performing the stand attachment in
reverse.
Installing on the wall
Install the monitor at least 100 mm (3.9 inches) away from the wall and leave about 100 mm (3.9 inches)
of space at each side of the monitor to ensure sufficient ventilation. Detailed installation instructions can be
obtained from your local retail store. alternatively, please refer to the manual for how to install and set up a
tilting wall mounting bracket.
100 mm
(3.9 inches)
Monitor head
100 mm
(3.9 inches)
100 mm
(3.9 inches)
100 mm
(3.9 inches)