Lenovo T24t-20 23.8" 16:9 Multi-Touch IPS Display - Manual (Page 20)

Using the On-Screen Display(OSD) controls
To adjust the settings, the user controls can be viewed through the OSD.
Advanced Settings
Port Settings
Menu Settings
Input Signal: HDMI Resolution: 1920x1080 Refresh Rate: 60Hz
Exit
Monitor Controls
T24t-20
Brightness 75
75 Contrast
®
USB C Power Delivery : 80W
To use the controls:
1. Press to open the main OSD menu.
2. Use or to move among the icons. Select an icon and press to access that
function. If there is a sub-menu, you can move between options using or , then
press to select that function. Use or to make adjustments then press to save.
3. Press to move backwards through the sub-menus and exit from the OSD.
4. Press and hold for 10 seconds to lock the OSD. This will prevent accidental
adjustments to the OSD. Press and hold for 10 seconds to unlock the OSD and allow
adjustments to the OSD.
5. Enables DDC/CI by default. Use OSD Exit Key, press and hold for 10 seconds to
disable / enable DDC/CI function. A message "DDC/CI disable" is shown on the screen.
6. The ENERGY STAR option resets all user settings to default values so that the monitor
can meet the requirements of Energy Star.
Energy Star is an energy saving program for consumer electronics led by the U.S.
government. It was launched in 1992 by EPA and DOE to reduce energy consumption
and greenhouse gas emissions. Energy Star logo is a symbol of energy conservation and
environmental protection. It improves the concept of energy efficiency of consumers
and manufacturers, and effectively guides the market.
The regulation of Energy Star improves energy efficiency and reduces air pollution
by using more energy-efficient equipment in homes, offices and factories. One way to
achieve this goal is to use management to reduce energy consumption when products are
not in use. The default settings for monitors conform to Energy Star certification. Any
changes by users for more features and functionalities may increase power consumption,
which will exceed the limitation of Energy Star’s standard. If the user changes the
options related to energy efficiency when using, such as brightness, color mode, etc.,
select All Reset Factory or choose the Energy Star option, the power consumption will
be restored to the energy efficiency with Energy Star standard.
For more information, please refer to (www.energystar.gov/products). All products of
Energy Star will be posted online and can be accessed directly by governments, public
institutions and consumers.
Chapter 1.Getting started 2-3