Front and back panels, Back panel functions, Front panel functions – Eltax HT-153 User Manual
Page 8: Open/close, While in dvd mode, Usb connect readonly usb input, Use this button to open and close the disc tray, When the unit is initially powered, a brief surge, Pause, Scart in/out

4
4
4
4
4
8
SPEAKER OUTPUT
SR
SL
FR
FL
CEN
SW
AM
ANTENNA
FM
AUDIO INPUT
AUX 1
AUX 2
VIDEO INPUT
VIDEO 1
VIDEO 2
AUDIO OUTPUT
PRE OUT
SW
COAXIAL
VIDEO OUTPUT
VIDEO
S-VIDEO
SCART IN/OUT
L
R
L
R
L
R
90-240V
50~60Hz
DVD-RECEIVER
MODEL:
POWER SOURCE:
POWER CONSUMPTION:
ITEM NO.:
SERIAL NO.:
HT-153
90-240V 50~60Hz
130W
11036.01
XXXXXXXXXXXXXX
HT-153 HOME THEATRE RECEIVER
VOLUME
8
FRONT AND
BACK PANELS
Front Panel Functions
Back Panel Functions
1. ANTENNA
Use to connect the provided indoor FM and
AM loop antennas.
2. AUX INPUT
Use to connect input for both auxiliary 1 and 2
music sources.
3. AUDIO OUT
Use to connect both the right and left channel
line outputs as well as subwoofer output.
4. VIDEO INPUT FOR AUX 1
8. S-VIDEO OUTPUT
10. REAR
Use to connect the four terminals of the left
and right surround sound speakers.
11. FRONT/MAIN
Use to connect the four terminals of the left
and right front or main speakers.
12. CENTER/SUBWOOFER
Use to connect the four terminals of the center
and subwoofer speakers.
13. AC 90V-240V 50/60H
Z
This unit comes with an AC power cord. Be
sure its prongs are dry before plugging it into an
electrical outlet. Take caution not to overextend
the cord or walk on it.
5.
NEXT
While in the DVD status, you may press this
button for next track.
.
8. VOLUME
Use this button to control the unit's volume. It
controls all six channels simultaneously.
2. OPEN/CLOSE
Use this button to open and close the disc tray
while in DVD mode.
1
2
3
4
5
6
8
4.
PREV
While in the DVD status, you may press this
button for previous track.
outlet, check to make sure all of the connections
have been properly completed. When they have
to power the unit.
of electricity may cause interference with other
1. POWER
Before plugging the power cord into the AC
been, carefully plug power cord into outlet.
Press the POWER button on the front panel
When the unit is initially powered, a brief surge
electronic equipment on the same circuit. If this
occurs, connect the unit to an outlet on a
different circuit.
3.
PLAY /
Use this button to begin play function while in
DVD mode.
Use this button to pause play function while in
DVD mode.
PAUSE
1
2
3
4
5
6
7
8
9
10
11
12
13
5. VIDEO INPUT FOR AUX 2
6. COAXIAL DIGITAL AUDIO OUTPUT
7. VIDEO OUTPUT
9.
SCART IN/OUT
6.
INPUT SIGNAL SOURCE
Use this button to select the proper input signal
source. (Note: The selected input will correspond to
the selected input terminal on the rear panel.)
7
7. USB CONNECT
Readonly USB input.