beautypg.com

Operation, Fuel, Warning – Echo PB-500H User Manual

Page 14: Fuel requirements

background image

14

NOTICE: Use of unmixed, improperly mixed, or fuel older than 90 days, (stale fuel), may cause hard starting, poor

performance, or severe engine damage and void the product warranty. Read and follow instructions in the Storage

section of this manual.

fuel

warning

Alternative fuels, such as E-15 (15% ethanol), E-85 (85% ethanol) or any fuels not meeting ECHO requirements are

NOT approved for use in ECHO 2-stroke gasoline engines. Use of alternative fuels may cause performance prob-

lems, loss of power, overheating, fuel vapor lock, and unintended machine operation, including, but not limited to,

improper clutch engagement. Alternative fuels may also cause premature deterioration of fuel lines, gaskets, carbu-

retors and other engine components.

Fuel Requirements

Gasoline - Use 89 Octane [R+M/2] (mid grade or higher) gasoline known to be good quality. Gasoline may contain up to

10% Ethanol (grain alcohol) or 15% MTBE (methyl tertiary-butyl ether). Gasoline containing methanol (wood alcohol)

is NOT approved.

Two Stroke Oil - A two-stroke engine oil meeting ISO-L-EGD (ISO/CD 13738) and J.A.S.O. FD Standards must be

used. Echo brand premium Power Blend X

TM

Universal 2-Stroke Oil meets these standards. Engine problems due to in-

adequate lubrication caused by failure to use an ISO-L-EGD (ISO/CD 13738) and J.A.S.O. FD certified oil, such as Echo

premium Power Blend X

TM

, will void the two-stroke engine warranty. (Emission related parts only are covered for five

years, regardless of two-stroke oil used, per the statement listed in the Emission Defect Warranty Explanation.)

IMPORTANT

Echo premium Power Blend X

TM

Universal 2-Stroke Oil may be mixed at 50:1 ratio for application in all Echo en-

gines sold in the past regardless of ratio specified in those manuals.

o

peraTIon

warning

Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all

openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop

before removing obstructions, clearing debris, or servicing unit. Blower housing may contain shredder blades and

other sharp edges that can cause serious injuries if touched, even if engine is off and blades are not moving. Wear

gloves to protect hands from sharp edges and hot surfaces.

warning

Operation of this equipment may create sparks that can start fires. This unit is equipped with a spark arrestor to

prevent discharge of hot particles from the engine. Metal blade use also can create sparks if the blade strikes rocks,

metal, or other hard objects. Contact local fire authorities for laws or regulations regarding fire prevention require-

ments.

This manual is related to the following products: