Asus 38" ROG Swift 2160p 144 Hz Gaming Monitor - Manual (Page 20)

2-3 ASUS LCD Monitor PG Series
2.3 Turning on the monitor
You can either press the button on the remote control or the button
on the monitor to turn on the monitor.
If the Power Indicator function is enabled and an input source is detected
，
the power LED will light up white to indicate that the monitor is turned on.
• If no signal is detected for around 10 minutes, the monitor
automatically enters saving mode.
2.4 For VESA wall mount
• Avoid damaging the monitor surface. While detaching the
monitor stand, always keep the monitor inside its EPS
packaging.
The detachable stand of this monitor is specially designed for VESA wall
mount.
1. Disconnect power and signal cables .Carefully put the monitor
face-down on its EPS packaging and detaching Stand
• The VESA wall mount kit ( 100 x 100 mm) is purchased
separately.
• Use only the UL Listed Wall Mount Bracket with minimum
weight/load 28.8 kg .
M6*34.5mm
2. Set the screw pitch *4 (M6*34.5mm ,Included on the porch ) on
VESA holes