Asus VA27DQ 27" 16:9 FreeSync Eye Care IPS Monitor - Manual (Page 20)

2-6 Chapter 2: Setup
• To use the USB 2.0 ports (VA27DQSB / VA27DQSB-W only): Take an USB
2.0 cable, and plug the smaller end (type B) of the USB upstream cable to the
monitor’s USB upstream port, and the larger end (type A) to your computer’s
USB 2.0 port. Make sure your computer is installed with the lastest Windows 7/
Windows 10 operating system. That will enable the USB ports on the monitor
to work.
When these cables are connected, you can choose the desired signal from the
Input Select item in the OSD menu.
2.5 Turning on the monitor
Press the power button . See page 1-2 for the location of the power button. The
power indicator lights up in blue to show that the monitor is ON.