Eaton Electrical PVH131/141 User Manual
Page 5
860750 Adj. screw
860748 Plug
Torque 75-83 N.m. (55-60 lb. ft.)
Y
396100 O-Ring
860606 Spring guide (2 Req’d)
626157 Spring
Control Kit
Threads
Body
02–151906
inch
883386
02–151907
metric
860628
Body (see table)
398071 Plug (3 Req’d)
Torque 9.8-10.2 N.m. (7.2-7.5 lb. ft.)
Y
396092 O-Ring (3 Req’d)
407533 Plug
Torque 12.1-12.4 N.m. (8.9-9.1 lb. ft.)
Y
396093 O-Ring
860566 Orifice plug
Torque 1.7-2.3 N.m.
(1.2-1.7 lb. ft.)
Z
113000 Plug
Torque 5.1-5.9 N.m. (3.7-4.4 lb. ft.)
Industrial Control (IC)
473769 Screw (2 Req’d)
Torque 31-37 N.m. (23-28 lb. ft.)
473765 Screw
(2 Req’d) Torque 31-37 N.m. (23-28 lb. ft.)
All parts shown are included in control
kit. Pressures must be set by user to circuit
requirements.
Z
NOTE
IC kits pre-set to 20-30 bar differential
pressure with all orifices/plugs in
place. Reference Vickers Overhaul
Manual M-2210-S for proper orifice/
plug configuration in various circuits
prior to control installation.
860747 Nut
Torque 14-20 N.m.
(10-14 lb. ft.)
Y
396096 O-Ring
Z
181728 Plug
Torque 29-32 N.m.
(21-24 lb. ft.)
939816 Spool
627391 Plug
Torque 29-32 N.m.
(21-24 lb. ft.)
Y
396096 O-Ring
Y
177969 O-Ring
(2 req’d)
Y
216630 O-Ring
263497 O-ring
248845 Pin
577639 Sleeve
937272 Check valve
Torque 1.7-2.3 N.m
(2.3-3.1 lb. ft.)
186580 Plug
Torque 54-59 N.m
(73-80 lb. ft.)
262499 O-ring
860750 Adjusting Screw
860747 Nut
Torque 8-10 N.m
(11-14 lb. ft.)
263069 O-ring
857734 Guide
857675 Spring
913454 Spool
1649 Ball
z
932716Connector
Torque 54-59 N.m
(73-80 lb. ft.)
z
263497 O-ring
z
932716 Retainer Ring
(Screw into bottom of thread)
z
248823 Pin
471627 Pin
217669 O-ring
177969 O-ring
(2 req’d)
197594 Back-up ring
473773 Screw (4 req’d)
Torque to 31-37 N.m
(42-50 lb. ft.)
860655 Plug Torque 75-83
N.m (102-112 lb. ft.)
113000 Plug
Torque 15-17 N.m
(20-23 lb. ft.)
02–314944
02–335254
Model designation
Control Kit
z
Torque summation parts
860653 Body
177969 O-ring (5 req’d)
928388 Guide
913453 Guide
262356 O-ring
860749 Plug
Torque 75-83 N.m
(102-112 lb. ft.)
Torque Limiter – T Option
C**T**-31
C**T**S-31