Asus ProArt Display PA248QV 24.1" 16:10 Adaptive-Sync IPS Monitor - Manual (Page 15)

2-2 Chapter 2: Setup
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
• The VESA wall mount kit (100 x 100 mm) is purchased separately.
• Use only the UL Listed Wall Mount Bracket with minimum weight/load
22.7kg (Screw size: M4 x 10 mm)
2.3 Adjusting the monitor
• For optimal viewing, we recommend that you look at the full face of the
monitor, then adjust the monitor to the angle that is most comfortable for you.
• Hold the stand to prevent the monitor from falling when you change its angle.
• You can adjust the monitor’s angle from +35˚ to -5˚and it allows
90˚ swivel
adjustment from either left or right. You can also adjust the monitor’s height
within +/- 130 mm.
90°
0°
90°
-5° ~ +35°
130mm
(Swivel) (Height adjustment) (Tilt)
Pivoting.the.monitor
1. Lift the monitor to the highest position.
2. Tilt the monitor to its maximum angle.
3. Pivot the monitor clockwise/counterclockwise to the angle you need.