4 troubleshooting (faq), Troubleshooting (faq) -15 – Asus ProArt PA169CDV 15.6" Multi-Touch 4K HDR Portable Monitor & Pen Display User Manual
Page 34

3-15
ASUS PA169CDV LCD Monitor
3.4 Troubleshooting (FAQ)
Problem
Possible Solution
Power LED is not ON
•
Press the
Power
button to check if the monitor is in
the ON mode.
•
Check if the power cable and adapter are
properly connected to the monitor and the power
outlet.
The power LED lights amber and
there is no screen image
•
Check if the monitor and the computer are in the ON
mode.
•
Make sure the signal cable is properly connected the
monitor and the computer.
•
Inspect the signal cable and make sure none of the
pins are bent.
•
Connect the computer with another available monitor
to check if the computer is properly working.
Screen image is too light or dark
•
Adjust the Contrast and Brightness settings via
OSD.
Screen image bounces or a wave
pattern is present in the image
•
Make sure the signal cable is properly connected to
the monitor and the computer.
Screen image has color defects
(white does not look white)
•
Inspect the signal cable and make sure that none of
the pins are bent.
•
Perform All Reset via OSD.
•
Adjust the RGB Tuning settings or select the Color
Temperature (Color Temp.) via OSD.
No sound or sound is low
•
Ensure that the HDMI cable is properly connected to
the monitor and the computer.
•
Adjust the volume settings of both your monitor and
HDMI device.
•
Ensure that the computer graphic card driver is
properly installed and activated.