English – Acer VT270 bmizx 27" 10-Point Touchscreen Monitor User Manual

Page 21

English

Press the MENU key to open the OSD.

2. Press up or down button to select Picture from the OSD. Then press enter button to

enter it.

3. Toggle to the left or right to adjust the sliding scales.
4. The Picture menu can be used to adjust the Brightness, Contrast, Black Boost, Blue

Light, ACM,Super Sharpness,Auto Config,H. Position,V. Position,Focus and Clock.

Brightness: Adjust the brightness from 0 to 100.

-----------------------------------------------------------------------------------------------------------

Note:

Adjusts the balance between light and dark shades.

6. Contrast: Adjust the contrast from 0 to 100.

-----------------------------------------------------------------------------------------------------------

Note:

Sets the degree of difference between light and dark areas.

7. Black Boost: Adjust the black level from 0 to 10. Enhances shadows by increasing the

brightness without changing lighter shades.

8. Blue Light: Filters out blue light to protect your eyes by adjusting how much blue light is

shown -- 80%, 70%, 60%, or 50%.

-----------------------------------------------------------------------------------------------------------

Note:

A higher value allows more blue light to pass through, so in order to

achieve the best protection, please select a lower value, of which 50% is in the

best state and has been tested by TÜV Rheinland and meet the requirements of TÜV

Rheinland's “Low Blue Light Content” standard.

ACM: Turn ACM on or off.

Note:

Set to "On", will be based on the current screen to dynamic contrast adjustment.

10.

Super Sharpness: Turn the Super Sharpness On or Off. Super Sharpness technology

can simulate high-resolution images by boosting the pixel density of the original source

to make images sharper and clearer.