Acer VT270 bmizx 27" 10-Point Touchscreen Monitor - Manual (Page 17)

English
Installation
1. Turn off your computer and unplug your computer's power cord.
2. Connect the signal cable to VGA (Optional) and/or HDMI (Optional) input socket of the monitor, and the
VGA (Optional) and/or HDMI (Optional) output socket of the graphics card on the computer. Then tighten the
thumbscrews on the signal cable connector.
3. USB Type B Cable (Optional, USB Type B input models only) Connect one end of the USB Type B cable (optional)
to your computer and connect the other end to your electric devices.
Connect the USB Type B (3.0) cable to port for fast charge (5V/1.5A).
Connect the USB Type B (3.0) cable to port.
4. Insert the monitor power cable into the power port at the back of the monitor.
5. Connect the power adapter and power cord to the monitor, then to a properly grounded AC outlet.
USB 3.0 (5V/1.5A)
Note: Audio output is only for audio output model. Please check user manual for more instruction.