Acer B248Y bemiqprcuzx 23.8" 16:9 Adaptive-Sync Video Conferencing IPS Monitor - Manual (Page 29)

6. Refresh rate num: Display the panel’s current refresh rate on the screen.
-----------------------------------------------------------------------------------------------------------
Note: If AdaptiveSync set "On" you can see the V Frequency to changes in the OSD.
7. Ultra-Low Latency: Set to On to speed up the processing time of the display.
-----------------------------------------------------------------------------------------------------------
Note: AdaptiveSync is On, the Ultra-Low Latency automatic set to On and Ultra-low
latency is not supported at resolutions below 800x600.
OSD
Mode - Standard
120
English
OSD Timeout
Picture
Color
Language
Off Transparency
Enter Move Exit
Off OSD Lock
OSD
System
Save Settings to...
Audio
Pertormance
X
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select OSD from the OSD.Then toggle to the
right to navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to adjust the sliding scales.
4. Language: Set the OSD menu language.
5. OSD timeout: Adjust the delay before turning off the OSD menu.
6. Transparency: Select the transparency when using gaming mode. The transparency
can be 0% (OFF), 20%, 40%, 60%, or 80%.
7. OSD Lock:To choose OSD lock on/off.