Acer B248Y bemiqprcuzx 23.8" 16:9 Adaptive-Sync Video Conferencing IPS Monitor - Manual (Page 28)

Audio
Mode - Stardard
70 Picture Volume
X
Enter Move
Off Mute Color
OSD
System
Save Settings to...
Audio
Pertormance
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select Audio from the OSD.Then toggle to the
right to navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to adjust the sliding scales.
4.
Volume: Adjust the volume
5. Mute: To choose mute on/off .
Performance
Mode - Standard
Picture
Color
Over Drive Normal
On Adaptive Sync
Enter Move Exit
Off Refresh Rate Num
OSD
System
Save Settings to...
Audio
Pertormance
X
On Ultra-Low Latency
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select Gaming from the OSD.Then toggle to
the right to navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to adjust the sliding scales.
4.
Over Drive: Select Off, Normal or Extreme.
5. AdaptiveSync: To control support AdaptiveSync or not, default is On.
-----------------------------------------------------------------------------------------------------------
Note: If AdaptiveSync is “ON”, then the Over Drive selection is set to “Normal”
automatically.
If AdaptiveSync is “OFF”, then the user can set Over Drive to either one of the
three settings including: (a) Extreme (b) Normal (c) Off.