Acer CB2 Series CB272U smiiprx 27" 16:9 HDR FreeSync IPS Monitor - Manual (Page 29)

English
System
Mode - Standard
HDMI Picture
Color
Input
Audio
OSD
On
Wide Mode
System
Hot Key Assignment
DDC/CI
X
Enter Move
Normal
Auto Source
Performance
HDMI Black Level
On
Full
DP Format DP 1.2
Mode - Standard
Picture
Color
Audio
OSD
X
Enter Move
Off Quick Start Mode
Off DPS
System
Performance
PIP/PBP
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select System from the OSD.Then toggle to the
right to navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to control functions.
4.
Input: Select the source from HDMI1(2.0), HDMI2(2.0), DP.
5. Auto Source: The default is “On”, which can support auto search for signal source in
order.
Note: Surround application must set Auto Source is “Off”.
6. DP Format: Default is DP1.2, can selection support DP1.1,1 or DP1.2 format.
7. Wide mode: You can select which screen aspect you are using. The options are Aspect
and Full.
8. PIP/PBP settings
-----------------------------------------------------------------------------------------------------------
Note:
1. PIP/PBP function does not support HDMI 1 and HDMI 2 simultaneously.
2. Under PIP & PBP mode, “Auto search” function is unavailable. The PIP/PBP
signal source needs to be selected manually.
PIP/PBP & Input status
HDMI 1 HDMI 2 DP
HDMI 1 -- X O
HDMI 2 X -- O
DP O O --
X: Does not support PIP/PBP function in this input combination