Acer CB2 Series CB272U smiiprx 27" 16:9 HDR FreeSync IPS Monitor - Manual (Page 20)

English
Installation
1. Turn off your computer and unplug your computer's power cord.
2. Connect the signal cable to the HDMI2.0 (optional) and /or DP (optional) input socket of the monitor, and the
HDMI2.0 (optional) and /or DP (optional) output socket of the graphics card on the computer. Then tighten the
thumbscrews on the signal cable connector.
3. Optional: Connect the audio input socket (AUDIO IN) of the LCD monitor and the line-out port on the computer with
the audio cable.
4. Insert the monitor power cable into the power port at the back of the monitor.
5. Plug the power cords of your computer and your monitor into a nearby electrical outlet.
HDMI 1(2.0)HDMI 2(2.0) DP
Note: Audio output is only for audio output model. Please check user manual for more instruction.
*POWER CORD specifications refer to page15
*For the installation of replaceable parts, please refer to the above installation instructions.
*Users may go to the local service network to replace /purchase the qualified replaceable parts.
For local service centers and service contacts, please refer to https://www.acer.com/ac/en/US/content/support