Acer ED322QR Pbmiipx 31.5" 16:9 Curved 144 Hz FreeSync VA Monitor - Manual (Page 26)

English
3. Toggle to the left or right to adjust the sliding scales.
4. Input: Select the source from HDMI 1 , DP, HDMI2
6 . Wide mode: You can select which screen aspect you are using. The options are Full,
Aspect.
7 . Hotkey Assigment: Select the function of shortcut key 1(Modes, Brightness, Volume,
Gamma, Contrast, Blue Light, Over Drive) and shortcut keys 2 (Modes, Brightness,
Volume, Gamma, Contrast, Blue Light, Over Drive)
8 . DDC/CI: Allows the monitor settings to be set through the software on the PC.
-----------------------------------------------------------------------------------------------------------
Note: DDC/CI, short for Display Data Channel/Command Interface, which allows
monitor controls to be sent via software.
9 .
HDMI Black level :You can select the level of blackness under HDMI source. The options are
Normal and Low.
10 . Quick start mode: Select Off or On. Turn on to speed up boot speed.
Information
5 . Auto Source : Automatically searches for available input sources.
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select "Information" from the OSD. Then toggle to the
right to navigate to the element you wish to adjust and press the joystick to enter it.
3. "Information" will shown "Main Source" 、 "Resolution" 、 "H/V Frequency" 、 "Mode" 、 "Serial
Number" information.
4 . Reset: Resets all settings to the factory defaults.