Acer Predator X34 Sbmiiphzx 34" 180 Hz Curved Gaming Monitor User Manual
Page 27
17
Picture
Move
Enter
Mode - Standard
Audio
Gaming
Color
OSD
System
Off
Power-off
USB charge
Off
Quick Start Mode
Off
USB 3.0
C-Type
USB Port Select
• Input
: Select the source from HDMI1 (2.0), DHMI2 (2.0), DP1, DP2 or TYPE C.
• Auto Source
: Select
On
to enable auto search for signal source in order or
Off
to disable this function.
• DisplayPort (DP) Format
: Select the DisplayPort format from
DP1.1
,
DP1.2
or
DP1.4
.
Note:
•
The default displayport format DP1.4 can support high-bandwidth video.
•
DP1.1 and DP1.2 support most video formats.
•
If the Mode is set to
HDR
, the default DP Format will be
DP1.4
and other
DP formats will be grayed out.
• Wide Mode
: Select your preferred screen aspect from
Full
,
Aspect
or
1:1
.
• PIP/PBP > PIP/PBP Mode
: Select PIP/PBP Mode from Off (function is
disabled) or from any of the following:
-
PIP Large/PIP Small
: Displays the sub source in a large window or small
window respectively. After you select this option, select the PIP Position from
Top Left
,
Top Right
,
Bottom Right or Bottom Left
and Sub Source from
HDMI1 (2.0)
,
HDMI2 (2.0)
,
DP1
,
DP2
or
TYPE C
. Then select Source Swap
to swap the main source and sub source. Finally select Audio Source from
Main
(source) or
Sub
(source).
-
PBP
: Displays the main source and sub source next to each other. Select
the PBP Size from
Aspect
and
Full
, select Sub Source from
HDMI1 (2.0)
,
HDMI2 (2.0)
,
DP1
,
DP2
or
TYPE C
. Then select Source Swap to swap the
main source and sub source. Finally select Audio Source from
Main
(source)
or
Sub
(source).
• Hot Key Assignment
: Select the function of Hot Key 1 and Hot Key 2 from
Modes
,
Volume
,
Gamma
,
Contrast
,
Blue Light
,
Over Drive
,
VRB
or
PIP/PBP
.
• Display Data Channel (DDC)/Command Interface (CI)
: Configure monitor
settings remotely from PC that is connected to the monitor. Select
On
to enable
this function or
Off
to disable.
• HDMI Black Level
: Select the HDMI Black Level from
Normal
or
Low
.
• Quick Start Mode
: Select
On
to speed up boot speed or
Off
to disable the
function.
• USB Port Select
: Set the USB port type to
C-Type
or
B-Type
.
• USB 3.0
: Select
On
to enable USB 3.0 or
Off
to disable the function.
X34 GS User Guide English