Acer Predator X34 Sbmiiphzx 34" 180 Hz Curved Gaming Monitor - Manual (Page 22)

12
• Brightness : Adjust the brightness from 0 to 100 .
Note: Adjusts the balance between light and dark shades.
• Contrast : Adjust the contrast from 0 to 100 .
Note: Sets the degree of difference between light and dark areas.
• Black Boost : Adjust the Black Boost from 0 to 10 . Enhances shadows by
increasing the brightness without changing lighter shades.
Note: If the image is very bright or has few shadow areas, adjusting this setting
may not result in any noticeable changes to the image.
• Blue Light : Filters out blue light to protect your eyes by adjusting how much
blue light is shown – Off , 80% , 70% , 60% , or 50% .
Note:
• Higher values allow more blue light through. For the best protection select
a lower value.
• When Blue Light function is set to On , Brightness and Contrast will show
each level of Blue Light value.
• Adaptive Contrast Management (ACM) : Dynamically adjust the contrast ratio
of the input image to achieve ultra-sharp images. Every scene is analyzed to
adjust images frame by frame and enhance colour quality, achieving the whitest
whites and the deepest blacks. Acer Adaptive Contrast Management allows
your LCD monitor to use less power and save energy. Turn this function On or
Off .
• High Dynamic Range (HDR) : Reproduce a greater dynamic range of
luminosity while preserving details in the darkest and brightest areas. Select
from Off (function is disabled), Auto (HDR function is automatically applied to
improve the screen image) or HDR-400 .
Note: If you set the HDR function to Auto or HDR-400:
• The Mode and Color Space are automatically set to HDR .
• Contrast, Black Boost, Blue Light, ACM Light Sensor, Gray Scale Mode,
6-axis Hue, 6-axis Saturate, DP Format, and PIP/PBP functions will be
grayed out.
X34 GS User Guide English
• Light Sensor : Detect ambient light conditions and dynamically optimize image
brightness and color parameters accordingly. Select from Off (function is
disabled), Level 1 (brightness will be automatically adjusted to the minimum
range), Level 2 (brightness will be automatically adjusted to the moderate
range) or Level 3 (brightness will be automatically adjusted to the maximum
range).
• Super Sharpness : Super Sharpness technology can simulate high-resolution
images by boosting the pixel density of the original source to make images
sharper and clearer. Turn this function On or Off .