Appendix a - technical specifications – Eagle Electronics EVR-100 User Manual
Page 17
EAGLE EVR-100 Operation Instructions
17
Appendix A - Technical Specifications
GENERAL
Power Supply:
13.8V DC.
Current drain:
Transmit
1.5 A at 7 W Tx / 0.6A at 1W Tx
Receive
Less than 250mA in standby
Useable channels:
International, USA, Canada, Weather (country specific)
Mode:
16K0G3E (FM)
PHYSICAL
LCD display (viewing):
41(H) x 53(W) mm
Backlight control:
Yes (On/Off )
Antenna connector:
SO-239 (50 ohm)
Temperature Range:
-17ºC to +50ºC
Waterproof:
JIS-7
Dimensions:
161(W) x 75(H) x 147(D) mm - without bracket
Weight:
0.87kg with microphone
Frequency stability:
+/- 10ppm
Frequency control:
PLL
GPS/NMEA input:
No
Comm port:
n/a
DSC:
No
FEATURES
Flush Mount kit:
Yes
Local/Distant control:
No
Position polling:
No
Group Call:
No
Channel Naming:
No
Dual watch, Favourite
channel scan, All scan:
Yes
TRANSMITTER
Frequency:
156.025 - 157.425MHz
Output power:
7 W / 1 W selectable
Transmitter protection:
Open / short circuit of antenna
Max Freq deviation:
+/- 5kHz
Spurious & harmonics:
better than 2.5µ W
Modulation distortion:
Less than 4%@ 1kHz for a +/-3kHz deviation
RECEIVER
Frequency:
156.025 - 163.275 MHz
12dB SINAD sensitivity:
0.25uV
20db SINAD sensitivity:
0.35uV
Adjacent CH selectivity:
more than 65db
Spurious response:
more than 65 db
Intermodulation Rejection ratio:
more than 65 db
Residual Noise level:
more than -40 db unsquelched
Audio output power:
2 W (with 8 ohm at 10% distortion)
4 W with 4 ohm external speaker
Compass safe distance:
0.5 m (1.5’)
Specifications are subject to change without notice.