Encore electronic ENMVG - Manual (Page 5)

Chapter 2: Getting Started
2.1 Connect ENMVG
To install the ENMVG into your computer, follow the steps below:
1. Connect the ENMVG to PC USB Hub.
2.2 Device Driver Installation
Placed the CD disk that comes with the ENMVG in the CD-ROM drive, then follow the
on-screen installation guide below.
1. Insert the installation CD into the
CD-ROM drive. The setup screen will
automatically appear.
2. Select the language
3. Click the “Setup Driver” button.
2