Before operating, Stop/clear – Electrolux TINSEB491MRR0 User Manual
Page 11

E
11
Before operating your new Microwave Oven make
•
sure you read and understand this Use and Care
Guide completely.
Before the Microwave Oven can be used, follow
•
these procedures:
Plug in the oven. Close the door. The oven display
1.
will show ENJOY YOUR OVEN TOUCH CLEAR
AND TOUCH CLOCK
.
Touch the
2.
sTOP/CLEAR pad. : will appear.
Set clock. See below.
3.
To set the clock
• Suppose you want to enter the correct time of
day 12:30 (A.M. or P.M.).
Procedure
Step
Touch
Touch
1.
set clock.
Enter the correct time of
2.
day by touching the
numbers in sequence.
1
2
3
0
Touch
3.
set clock again.
This is a 12 hour clock. If you attempt to enter an
incorrect clock time, ERROR will appear in the
display. Touch the
sTOP/CLEAR pad and re-enter
the time.
• If the electrical power supply to your microwave
oven should be interrupted, the display will
intermittently show ENJOY YOUR OVEN TOUCH
CLEAR AND TOUCH CLOCK after the power
is reinstated. If this occurs during cooking, the
program will be erased. The time of day will also
be erased. Simply touch
sTOP/CLEAR pad and
reset the clock for the correct time of day.
NOTE
Your Microwave Oven can be programmed with
the door open except for
sTART, popcorn, fresh
veggies, frozen veggies, baked potato and
sensor reheat.
stop/Clear
Touch the
sTOP/CLEAR to:
Erase if you make a mistake during programming.
1.
Cancel timer.
2.
Stop the oven temporarily during cooking.
3.
Return the time of day to the display.
4.
Cancel a program during cooking, touch twice.
5.
Before Operating