Furrion Aurora 49" Class HDR 4K UHD Full-Shade Outdoor LED TV - Manual (Page 22)

22
TV Settings
English
Setup Menu
HDMI CEC
Press to enter
sub-menu, then
press or to
select
Off /On for
HDMI CEC .
When selecting On ,
the sub-menu in the
right column will be
available to set up.
Auto Standby
Press or to select Off /On .
In On mode, TV will shut down when there is no signal for
several minutes.
Auto TV on
Press or to select Off /On .
In On mode, TV will automatically turn on when the
connected CEC device is turned on.
HDMI ARC
Press or to select Off /On .
Set the HDMI ARC On if you want to enable the ARC
function with a connected 5.1/7.1 Home Theater System.
Device control
Press or to select Off /On .
In On mode, it allows a connected CEC device to be
controlled by TV remote control.
Device list
Press to display a list of HDMI CEC devices currently
connected to the TV.
EDID Switch
Select the EDID
version.
Press or to select Auto, EDID 1.4 or EDID 2.0 .
Restore
Default Reset to factory
default settings.
Press or to select Yes or No .
NOTE: HDMI CEC function is only available when connecting with a CEC device.