EverFocus EDN800 - Manual (Page 36)

EDN800
36
value and down arrow to decrease value.
Press Apply to apply the setting changes or Reset to reset without saving the
change.
Set Date/Time Sync.
Check Enable NTP checkbox to enable NTP server.
NTP server: Time automatically adjusted by synchronizing with NTP server will
be used as the standard time of the camera.
Sync. Internal: Select an interval (1 - 24 hours: in 1 hour intervals) of
synchronization with the NTP server.
Time Zone:
Select a time zone according to the location where the camera is in use.
Press Apply to apply the setting changes or Reset to reset without saving the
change.