beautypg.com

Reset, Demo mode, Resetting the microprocessor – Event electronic DEH-P8600MP User Manual

Page 8: About the demo mode, Before you start, Reverse mode, Feature demo

background image

WMA is short for Windows Media Audio and

refers to an audio compression technology

that is developed by Microsoft Corporation.

WMA data can be encoded by using Windows

Media Player version 7 or later.

Microsoft, Windows Media, and the Windows

logo are trademarks, or registered trademarks

of Microsoft Corporation in the United States

and/or other countries.

Notes

! With some applications used to encode WMA

files, this unit may not operate correctly.

! With some applications used to encode WMA

files, album names and other text information
may not be correctly displayed.

Resetting the microprocessor

The microprocessor must be reset under the

following conditions:

! Prior to using this unit for the first time

after installation

! If the unit fails to operate properly

! When strange or incorrect messages ap-

pear on the display

% Press RESET with a pen tip or other

pointed instrument.

RESET button

About the demo mode

This unit features two demonstration modes.

One is the reverse mode, the other is the fea-

ture demo mode.

Important

The red lead (ACC) of this unit should be con-
nected to a terminal coupled with ignition switch
on/off operations. If this is not done, the vehicle
battery may be drained.

Reverse mode

If you do not perform an operation within

about 30 seconds, screen indications start to

reverse, and then continue reversing every 10

seconds. Pressing button 5 when power to

this unit is turned off while the ignition switch

is set to ACC or ON cancels the reverse mode.

Press button 5 again to start the reverse

mode.

! Some entertainment displays may not oper-

ate the reverse mode.

Feature demo

The feature demo automatically starts when

power to this unit is turned off while the igni-

tion switch is set to ACC or ON. Pressing but-

ton 6 during feature demo operation cancels

the feature demo mode. Press button 6 again

to start the feature mode. Remember that if

the feature demo continues operating when

the car engine is turned off, it may drain bat-

tery power.

Before You Start

En

8

Section

01