Samson UB1 Omnidirectional USB Boundary Microphone - Manual (Page 6)

4
Installing the UB1
Getting Started with Windows XP
1. The first time you plug the UB1
into a USB port, Windows will
install the universal drivers for
that port. A balloon tip will pop
up, telling you it has found the
USB Audio codec (figure 1).
2. When it is finished installing
the drivers, it will say “Your new
hardware is installed and ready
to use” (figure 2).
Note: This balloon will not pop
up again for the same USB port.
3. The volume can be changed
by going to Control Panel and
opening Sounds and Audio
Devices (figure 3).
Figure 1
Figure 2
Figure 3