MIDEA MPF08CR71 - Manual (Page 16)


Page 15

Type 1: Hung window installation
1. Cut the adhesive foam seal A and B strips to the
proper lengths, and attach them to the window sash
and frame as shown.
NOTE
Once the Exhaust Hose asse m bly and Adjustable Window Slider are prepared,
choose fro m one of the following two installation m ethods.
Foa m seal B
(Adhesive type-shorter)
Foa m
seal A
(Adhesive
type)
Window
slider A
Window
slider B
(if required)
Foa m seal C
(Non-adhesive type)
Security Bracket
2 Screws
Ins
tallation
Ins
tructions
2. Insert the window slider assembly into the window
opening.
3. Cut the non-adhesive foam seal C strip to match the
width of the window. Insert the seal between the glass
and the window frame to prevent air and insects from
getting into the room.
4. If desired, install the security bracket with 2 screws as
shown.
5. Insert the window slider adaptor into the hole of the
window slider.