Roborock Auto-Emtpy Dock FCC - Manual (Page 22)

18
Routine Maintenance
4
Washable Filter
* Clean as needed
1. Open the filter cover and remove the filter.
2. Rinse the filter and gently knock out dirt until clean.
Note: Do not touch the surface of the filter with your hands, brush, or hard
objects to avoid possible damage.
3. Leave the filter to dry for at least 24 hours or until completely
dry.
4. Re-install the filter and close the cover.
Notes:
• Make sure that the filter is completely dry before use.
• Purchase an additional filter to alternate.