Philips AC3256/30 - Manual (Page 21)

21 EN
E
ngl
ish
Problem Possible solution
The appliance
produces a strange
smell.
The first few times you use the appliance, it may produce
a plastic smell. This is normal. However, if the appliance
produces a burnt smell, contact your Philips dealer or an
authorized Philips service centre. The appliance may also
produce an unpleasant smell when the filter is dirty. In this
case, clean or replace the filter concerned.
The appliance is
extra loud.
If the appliance is too loud, you can change the fan speed to a
lower fan speed level. When using the appliance in a bedroom
at night, choose the sleep mode.
The appliance still
indicates that I
need to replace a
filter, but I already
did.
Perhaps you did not reset the filter lifetime counter. Plug in the
appliance, touch to switch on the appliance, and touch and
hold the reset button
for 3 seconds.
Error code "Er"
displays on the
screeen. The hall sensor is not working properly. Remove and then
reattach the front panel. If the error code "Er" still exists,
contact the Consumer Care Center in your country.
Error codes "E1",
"E2", "E3" or "E4"
displays on the
screeen.
The appliance has malfunctions. Contact the Consumer Care
Center in your country.