Philips AC3256/30 - Manual (Page 10)

10 EN
Note
• Make sure that the side with the two
clips is pointing towards you, and that
all hooks of the pre-filter are properly
attached to the purifier.
6
To reattach the front panel, mount
the panel onto the top of the
appliance first (1). Then, gently push
the panel against the body of the
appliance (2).
4 Using the
appliance
Understand the air
quality light
Air quality light
color Air quality level
Blue Good
Blue-violet Fair
Red-purple Unhealthy
Red Very unhealthy
The air quality light automatically goes
on when the appliance is switched on,
and lights up all colors in sequence.
In a short time the air quality sensors
select the color that corresponds to the
ambient air quality.
Switch on and off
1
Put the plug of the appliance in the
power socket.
2
Touch to switch on the
appliance.
» The appliance operates under
the auto mode by default.