Philips AVENT SCF875/01 - Manual (Page 22)

24
ENGLISH
Problem Possible cause Solution
The appliance
does not generate
steam. You have not put
water in the water
tank. Switch off and unplug the appliance,
and then add water to the water tank.
There is too much
limescale buildup in
the water tank. Descale the water tank. Refer to the
section “Descaling” in the chapter
“Cleaning and descaling”.
Steam is leaking
from the water
tank. The water tank lid is
not closed correctly. Close the water tank lid correctly. Make
sure the icon on the water tank lid is
lined up with the icon on the water
tank.
The jar is not
assembled correctly
on the main unit. Place the jar correctly on the main unit.
The steam outlet
on the water tank
lid is blocked by
contamination or
limescale buildup. Clean the steam outlet on the water tank
lid.
The steam inlet on
the jar lid is blocked
by contamination. Clean the steam inlet on the jar lid.
The ingredients
are not
completely
heated through. The pieces in the jar
are too big. Cut the food into smaller pieces (cubes
no bigger than 1 cm).
There is too much
food in the jar. Decrease the amount of food in the jar.
There is too much or
too little water in the
water tank. Add the correct amount of water
according to the steaming time. Check
the recipe booklet and/or the table in
the chapter “Ingredients and steaming
time” to make sure that you add the
correct amount of water according to the
steaming time for the ingredients you
want to steam or the recipe you want to
prepare.
The steaming time is
too short. Select a longer steaming time
(30 minutes tops).
The jar is not placed
on the main unit
correctly. Place the jar on the main unit correctly
with the jar lid on the bottom.
There is too much
limescale buildup in
the water tank. Descale the water tank. Refer to the
section “Descaling” in the chapter
“Cleaning and descaling”.