Pioneer X-CM56 - Manual (Page 31)

Additional information 10
31
En
English
Français
Español
When a USB storage device is connected
Problem Check Remedy
USB storage device is not
recognized. Is the USB storage device properly
connected? Connect the device securely (all the way in).
Is the USB storage device
connected via a USB hub? This unit does not support USB hubs. Connect the USB storage
device directly.
This unit only supports USB mass storage class devices.
This unit supports portable flash memory and digital audio
playback devices.
Only the FAT16 and FAT32 file systems are supported. Other file
systems (exFAT, NTFS, HFS etc.) are not supported.
This device does not support the use of external hard disc drives.
This is not a problem with this unit. Turn the power off then back on.
Some USB storage devices may not be recognized properly.
File cannot be played. Is the file copyright-protected (by
DRM)? Copyright-protected files cannot be played.
This is not a problem with this unit. Files stored on a computer cannot be played.
It may not be possible to play some files.
Folder or file names are not
displayed or are not properly
displayed. Do the folder of file names contain
more than 30 characters? The maximum number of characters displayable for the folder and
file names is 30.
Folder or file names are not
displayed in alphabetical
order. This is not a problem with this unit. The order of the folder and file names displayed depends on the
order in which the folders or files were recorded on the USB
storage device.
Much time is required to
recognize the USB storage
device. What is the USB storage devices
capacity? Some time may be required to load the data when large capacity
USB storage devices are connected (this could take several
minutes).
SN29402593_X-CM56&56D_En.book 31 ページ ２０１６年５月２７日 金曜日 午後３時４７分