beautypg.com

Using the tuner 07, English français español, Listening to the dab+ (x-cm56d only) – Pioneer X-CM56 User Manual

Page 23: About dab+ (digital audio broadcasting), Tuning

background image

Using the tuner

07

23

En

English

Français

Español

Listening to the DAB+ (X-CM56D only)

About DAB+ (Digital Audio Broadcasting)

Digital Audio Broadcasting is a digital transmission system
where audio signals are converted to digital signals for
broadcasting. DAB+ is broadcast as a group of data called
multiplex (ensemble) which may contain one or more
stations (services). Each station contains a primary service
and there may be one or more secondary services. This
allows several programmes or services to be transmitted on
a single frequency.

Tuning

1

Press the TUNER until “DAB” appears on

the display.

When turned on for the first time, the unit scans radio
stations automatically to create a station list.
The stations will be stored in alphanumeric order and the first
station on the list will be selected and you will hear it through
the speakers.

2

Press the TUNE +/– to select the desired

station.

3

Within 10 seconds, press the ENTER on

the remote control to tune into the desired
station.

• If no station is found, “NO SIGNAL” appears.
• Up to 100 appears for total received stations.

Auto Scan

You can make the auto scan again when you move the unit
to other areas or add multiplex channels to the station list.
1

Press the TUNER until “DAB” appears on the display.

2

Press MENU and then press / until “DAB SCAN”

appears on the display.
3

Press ENTER and then press / until “AUTO”

appears on the display.
4

Press ENTER.

Auto Scan scanning begins.
After the scanning process is complete, the first station that
was detected is selected.

Manual tune

You can manually store stations which Auto Scan cannot
find. If reception is poor, you can adjust the sensitivity.
Manual tune is only available after Auto tune. Perform Auto
Scan first.
1

Press the TUNER until “DAB” appears on the display.

2

Press MENU and then press / until “DAB SCAN”

appears on the display.
3

Press ENTER and then press / until “MANUAL”

appears on the display.
4

Press ENTER.

5

Within 10 seconds, press the TUNE +/– to select the

DAB+ frequency.
6

Within 10 seconds, press the ENTER.

• If the level is too low, move the aerial or unit to improve

reception.

DAB + SIGNAL

MULTIPLEX
(ENSEMBLE)

SERVICES

SERVICES
COMPONENTS
(STATIONS)

SN29402593_X-CM56&56D_En.book 23 ページ 2016年5月27日 金曜日 午後3時47分