Denon AH-C160W User Manual
Page 12
2
When the headphones power is off, press and hold the
control button for approximately 3 seconds.
.
R
0
The status indicator LED lights purple for approximately 1 second
and then flashes red and blue alternately indicating that the
headphones are in pairing registration mode.
0
If the status indicator LED does not light even when the control
button is pressed, the rechargeable battery has no power
remaining. Charge the battery.
3
Select “DENON AH-C160W” from the list of devices
displayed on the screen of your Bluetooth device.
.
When registration (pairing) is complete and a Bluetooth connection
is established, the status indicator LED on the headphones lights
blue for approximately 5 seconds.
4
Playing back music on the Bluetooth device.
Music played back on the connected Bluetooth device is output from
the headphones.
0 If the power is on, turn the power off before pairing.
0 The headphones pairing registration mode is canceled if pairing is not completed
within 3 minutes. In this case, press and hold the control button for approximately 3
seconds to turn the power off, and then try pairing again.
0 If you are requested to enter a PIN code (pass key), enter “0000” (four zeros).
12