ProSoft Technology WRC-CANX - Manual (Page 10)

Western Reserve Controls WRC-CANX-xx Series 4
PUB 14.1 User’s Manual
6
4. Hardware Installation and Configuration
4.1. Overview
A CAN-Bus Extender is a single device connecting to two parts (sub-network) of a single CAN-
Bus network. The CANX-DIN is to be mounted on an EN50022 DIN rail (available from WRC and WRC’s
distributors as part number WRC 50022) in any orientation. The CANX-NEM is a NEMA-4X polycarbonate
enclosure and is panel mounted.
Figure 4-1 WRC-CANX-DIN Series 4 Dimensional Drawing
--NET A- -NET B--
1 2 3 4 5 6 7 8
OPEN
NSA
NSB
DGN MS
NETWORK A
4.65” (118 mm)
1.79” ( 45,5 mm)
SW1
NETWORK B
W1
W3