PLANET IPX-330 - Manual (Page 5)

5
1.2.4 Placement
Make sure the device is placed in a safe environment to avoid equipment failure.
 DO NOT place anything on top of the device. Excessive weight could damage it.
 DO NOT obstruct ventilation slots on each side of the IPX-330 or expose it to
direct sunlight or other heat source. Be sure that there is adequate air flow
around the IPX-330.
 Place the IPX-330 on a flat surface to avoid any damage.
1.2.5 Physical Connection
100Base-TX UTP
Telephone wire
Internet
Video Phone IP Phone IP Phone
Switch Router
ATA
Mobile
SIP Phone
PSTN
2 x FXO
Physical Connection Topology of the IPX-330