PLANET IPX-2000 - Manual (Page 7)

Note
The IPX-2000 supports HTTPs secure web session. Machine
operators or system administrator may login machine via secure
web connection for machine administration.
Format: https://WAN IP address of IP PBX
Note
In order to connect machine for administration, please locate your
PC in the same network segment (192.168.1.x) of IPX-2000. If
you’re not familiar with TCP/IP, please refer to related chapter on
user’s manual CD or consult your network administrator for proper
network configurations.
LAN/WAN Interface quick configurations
Nature of PLANET IPX-2000 is an IP Sharing (NAT) device, it comes with two
default IP addresses, and default LAN side IP address is “192.168.1.1”, default
WAN side IP address is “192.168.0.1”. You may use any PC to connect to the
LAN port of IPX-2000 to start machine administration.
Hint
In general cases, the LAN IP address is the default VoIP router
of LAN side workstations for Internet access, and the WAN IP of
IPX-2000 are the IP address for remote calling party to connect
with.
Execute your web browser, and insert the IP address (default:
https://192.168.1.1) of IP PBX in the adddress bar. After logging on machine
with username/password (default: admin / admin), browse to “System” -->
“LAN setup” configuration menu:
Parameter Description
IP address LAN IP address of the IP PBX
Default: 192.168.1.1
Mask LAN mask of the IP PBX
Default: 255.255.255.0
After confirming the modification you’ve done, Please click on the Save button to
apply settings and browse to “IP PBX service” page in “Service” menu to click
the “Reload” button to make the settings effective
Hint
It is suggested to keep the DHCP server related parameters in
default state to keep machine in best performance.