PLANET IPX-1980 - Manual (Page 5)

5
2.3 LED & Button definition
LED definitions
Front Panel LED State Descriptions
PWR
On
Off PBX Power ON
PBX Power OFF
SYS
On
Flashing
Off Enableing system
System is working
System is off
LAN
Flashing
Off LAN is connected successfully
Ethernet not connection
WAN
Flashing
Off PBX network connection established
Waiting for network connection
FXO Port
On
Flashing
Off Port is connected
The port is actived
Port is not enabled
Button Action Description
Reset
Press for 6 Secs System reboot
Press Over 6 Secs Reset to Factory Default
2.4 Placement
Make sure the device is placed in a safe environment to avoid equipment failure.
DO NOT place anything on top of the device. Excessive weight could damage it. l
DO NOT obstruct ventilation slots on each side of the IPX-1980 or expose it l
to direct sunlight or other heat source. Be sure that there is adequate air flow
around the IPX-1980.
Place the IPX-1980 on a flat surface to avoid any damage. l