OPHIT DMS-H1616 - Manual (Page 14)

General Specification
14
3.1.3 Fuse Replacement
1. Turn off the system and disconnect the system power cord from the wall outlet. (See①)
2. Press the fuse holder in the direction of the arrow and pull it out. (See②)
3. Remove the old fuse and replace it with a new one.
4. After installing the new fuse, connect the plug to the system.
①
②
DANGER
To avoid risk of electric shock, always disconnect the plug from the system
prior to fuse replacement.
Fuse information is shown in the following table.
Input Ratings Fuse Ratings Maker Order No.
100-240VAC T3.15AL/250V Littelfuse 0218 3.15