Mpman CSD284PLL - Manual (Page 3)

AC OPERATION
Connect the plug to the AC socket of the unit and the other end to a standard AC
outlet.
ATTENTION
1. Do not plug or unplug the power cable while you have wet hands.
2. When planning not to use this unit for a long time, disconnect the power cable
from the wall outlet.
3. When disconnecting the power cord from the wall outlet, do not pull on the cord
in order to avoid shock risks caused by damaged cable.
BATTERY OPERATION
Disconnect the AC Cord Set completely. Open the Battery Compartment Door and
insert 6 pieces UM-2 "C" size batteries into the battery compartment with battery
polarity as shown inside the battery compartment.
RADIO OPERATION
1. Press POWER/FUNC button to select FM radio mode.
2. Press the Skip  Button or Skip  Button step by step to tune to the desired
radio stations.
3. Press and hold the Skip  Button or Skip  Button to search the next radio
station in the direction of the search. The search operation simply finds stations
with strong signals, Stations with weak signal can only tuned in step by step.
4. If FM stereo broadcast received, (ST) will display on the LCD display.
5. Use the VOLUME+ or VOLUME- button to adjust the volume to the desired
listening level.
AUTO STORE RADIO STATIONS IN THE MEMORY
1. Press POWER/FUNC button to select FM Radio mode..
2. Press the PLAY/PAUSE button, the unit will start to search all available station
and automatically save in the memory.
3. Up to 20 radio stations can stored in the memory.
MANUAL STORE RADIO STATIONS IN THE MEMORY
1. Press the Skip  button or Skip  button to search the desire radio station.
2. Press the MODE/MEMO button, the display with show
“P-XX” and flashing and
press the Skip  Button or Skip  Button to select the desired memory radio
station number.
3. The radio station will store in the memory after 5 seconds.
4. Up to 20 radio stations can stored in the memory.
- 3 –
TO SELECT A STORED RADIO STATION IN THE MEMORY
Press the STOP/M+ button to skip to the next stored radio station.
CD/MP3 OPERATION
Playing Audio CDs
1. Press the POWER/FUNC button to select CD mode.
2. Insert an audio CD disc in the CD compartment and close the CD door, the unit
will start reading the disc, it will show the total number of tracks of the entire
disc after reading and start playing the first track of the entire disc.
3. During playing, press the PLAY/PAUSE button to temporarily pause playing. To
resume, press the PLAY/PAUSE button again.
4. To stop playing the disc, simply press the STOP/M+ button
Playing MP3 Discs
1. Press the POWER/FUNC button to select CD model
2. Insert a MP3 disc in the CD compartment and close the door, the unit will start
reading the disc, it will show the total number of tracks of the entire disc after
reading.
3. Press the PLAY/PAUSE button to start playing the disc.
4. If your MP3 disc has folders, press and hold the MODE/MEMO button for about
2 seconds, the folder number will display on the LCD display.
5. Press the Skip  button to go to the next folder or press the Skip  button to
go back to the previous folder.
6. During playing, press the PLAY/PAUSE button to temporarily pause playing. To
resume, press the PLAY/PAUSE button again.
7. To stop playing the disc, simply press the STOP/M+ button.
Skip Mode
1. During play or pause mode, press the Skip  button to go to the next track.
2. For MP3 disc with folders, when the end of the folder is reached, press the Skip
 button will go to the first track of the next folder.
3. During play or pause mode, press the SKIP  button to go back to the
beginning of the track.
4. During play mode, press the SKIP  button twice will go back to the previous
track.
5. For MP3 disc with folders, when reaching the beginning of the folder, press the
SKIP - button twice will go to the last track of the previous folder.
- 4 -