Delay start, Starting a programme – Electrolux LAVAMAT 86810 User Manual
Page 19
19
Delay Start
1. Press the TIME key repeatedly, until the DELAY START symbol
flashes.
2. Press the OK key. “Start in 0 min” is shown in the display.
3. Press the TIME key repeated-
ly, until the display shows
the desired period by which
you want to delay the start,
e. g. “Start in 4 h” (=4
hours). A black bar appears
under the
symbol.
3
If 20 h is displayed and you
press the key again, the delayed start is cancelled.
4. Press the OK key. The display shows the DELAY START symbol
and the
time until the end of the programme (including period by which the
start has been delayed).
5. To activate the Delay Start,
press the START/PAUSE key.
The display now shows e. g.,
“Start in 4.00” (==4 hours).
The display for the time re-
maining until the start of the
programme is reduced in 30
minute intervals (e. g., 4.00,
3.30, 3.00, ... 0.30, 0).
Starting a programme
1. Check that the water tap is open.
2. Press the START/PAUSE key.
The programme is started or it starts after the time delay set has
elapsed.
3
If after pressing the START/PAUSE key the display shows “Door not
Closed”, the door has not been shut properly. Push the door firmly
closed and press the START/PAUSE key again.
D e l a y S t a r t
12.45
S t a r t i n 4 h
18.37
aýýýýýaýaýaýaýaýaýaýKýT_
TEMP.
RPM
OPTIONS
OK
TIME
L I N E N / E A S Y C A R E
12.45
S t a r t i n
4.00
50C 800 aýýýýýaýaýaýaýaýaýaýaýT
TEMP.
RPM
OPTIONS
OK
TIME