Amprobe A-5000 Sheath Fault Locator User Manual
Page 19
17
C onnec tor
Figure 9-1: A-5000 Receiver Battery Replacement
tEChNICAL SPECIFICAtIoNS
Frequency:
4.8 Hz Crystal Controlled
Input Sensitivity:
5 MV
Sensitivity Control:
Automatic
Active/Reference Signal Sensitivity
Logarithmic: 0 − 120
Linear: 0 − 999
Battery:
9 V NEDA 1604 or equivalent
Battery Life:
100 hr. continuous use
Battery Test:
Automatic at power ON for 3 sec.
Weight:
4.4 lb (2.0 kg)
Dimensions:
32” H x 22” W x 1” D
(81 cm H x 56 cm W x 2.5 cm D)
Operational Temp:
-4°F − +120°F
(-20°C − +50°C)
APPENdIx
APWA marking Colors
The following color markings have been established by the American Public Works Association (APWA):
Conductor
Color
Electric power lines, cables, or conduits
Red
Communication lines, cables, Conduits, CATV
Orange
Gas, oil, petroleum, or other gaseous materials
Yellow
Sewers, storm and sanitary, drain lines
Green
Water, irrigation, or slurry lines
Blue
If you have any questions regarding marking requirements or procedures in the United States, please call your local One Call
Center. International customers: please check with your local regulatory authorities or utility companies required color markings
may vary between different countries.