Amprobe AT-4000 Series Advanced-Wire-Tracer - Manual (Page 10)

9
booster (B2024 or B2025) the unit will work in ultra high “U-HI” mode
only. Remove the battery booster to return to normal operation.)
B2024 Battery Pack
24 Volt Nickel-Cadmium rechargeable cell custom designed for light
weight, small size, and durability. Used to boost the output of the
T-4000. Consult the specs for the boost levels. Includes a self-resetable
fuse. Be sure to charge fully before use.
(DO not use the B2024 when tracing energized lines.)
Note: When using the battery booster (B2024 or B2025) the unit will
work in ultra high “U-HI” mode only. Remove the battery booster to
return to normal operation.
B2025 110V Converter/Recharger
Can be used to either recharge the B2024 or directly boost the T-4000.
To recharge the battery, leave it connected for at least 8 hours. (DO
not use the B2024 when tracing energized lines.)
Note: When using the battery booster (B2024 or B2025) the unit will
work in ultra high “U-HI” mode only. Remove the battery booster to
return to normal operation.
C2901 Pigtail- Banana Plug Cord set
For use on 110VAC receptacles.
C2902 Alligator-Clip Banana Plug Cord set
For direct contact to bare conductors
MTL-G Grounding Test lead And Alligator Clip
APPLICATIoN NoTES
Using the R-4000CoN with Thumbwheel
Turn ON unit by pressing the ON/OFF push button. 1.
Press MODE push button to select the sensitivity level 2.
OPEN Tracing: LED ON a)