Amprobe INSP-3 Wiring-Inspection-Tester User Manual

Page 11

• Meter detects faulty wiring in need of repair

without removing outlets cover plates, or panel
covers:

• Faulty splices and connections

• Incorrect wiring

• Undersized wiring

• Faulty GFCIs,

• Faulty or incorrectly wired AFCIs

• Incorrect line voltage

• Poor ground quality

• User selectable 10,15 and 20 amps loads to verify

performance of the electrical system

• Incorrect wiring or voltage drop test failure is

clearly indicated by flashing screen

• Will not trip circuit breakers or blow fuses

during the test

• Tests GFCI and AFCI operations

• Check ground quality for safety and ability to

support sensitive electronic equipment

• Measure fault currents

• Save money and time by eliminating guess work.

NOTE: The Inspector™ 3 does not check the
condition of wiring insulation.